Powerhouse Racing is proud to offer our S45 Turbo Manifold for the 2jzgte engine.
Standard on all PHR stage 4 and 5 turbo kits
1.5" primaries, optional wastegate and turbo inlet configurations
NOW FEATURING THE PHR EXCLUSIVE BILLET COLLECTOR!
This manifold was designed for 3 purposes:
First: Ease of installation. - Don't spend years trying
to get your manifold to fit, only to have it come loose again. Those
with the experience have bloodied enough knuckles, and ground down
enough nuts to know how important this is.
Second: Fitment. - This manifold is hands down the best
fitting manifold on the planet. Not only does this manifold fit in the
car the way it should, it fits EVERY T4 turbo available. From the baby
T4's to the massive Precision 8285. Even with the H cover this turbo
fits under the stock hood, away from the shock tower and you can even
run it WITH a spool valve. Nobody else can claim this. Nobody else is
even close.
Third: Maximum Performance. - We put our manifold up the the most well known and top notch manifolds in the world and blow their doors off!
Reasons you want this manifold and not the other garbage out there:
1.First our manifolds use schedule 10 stainless steel tubing. Most use
14-18 gauge which is very thin and which will not last for a long time
and if the material breaks off, (which others have multiple times) you
will trash the turbo with the slag and broken off parts from the cheap
material used as it shoots up in the turbo
2.All TIG welded, Fully back purged, for strength quality and
flow.These also eliminates any crystallization (slag). Slag can break
off from inside lesser manifolds and damage the turbo.>
3. Our collector design is the best available. It’s flow is far
superior to any you will find out there. It also promotes inertia of
cylinder pulses, improving horsepower and response, as well as reduced
back pressure.>
4.The manifold uses any waste gate available and any variety of sizes
and needs for each customer (more personal build) other name brand
manifolds waste gate assemblies have Fallen off over time!
5.Longer runner design will increase power and torque, especially with larger turbo set ups
6.The superior design of the waste gate(s) also do not get in the way of the intercooler pipe, or air filter set up
7. They will clear ANY turbo up to an GT45\80 with maximum clearance
allowed from valve cover, hood, strut tower, and water neck.
8. Not only can you fit any turbo, you can fit it WITH a spool valve,
even on the gt45/80 which no other manifold on the planet can.
9. Only our manifolds come with dump tube or tubes, which save hundred(s) of dollars and extra down time
10. Do any custom configuration of down pipe and mid pipe set ups, for any exhaust set up, saving more fabrication and down time
11.Optional ceramic coating
12. Each one is built on a car so fitment and quality is guaranteed
13. PHR BILLET COLLECTOR
Powerhouse Racing Turbo Manifolds -
Our manifolds are hand built in-house by some of the best fabricators on
the planet. Pain-staking detail is taken in every inch of these works
of art. We'll put our workup against anybody on the planet. You won't
find one better. We've been doing it longer and we've been doing it
better. We have the experience that nobody else does. And our manifolds
are backed by 20 years of proven performance.
